Globe Surfer (3G Modem)

Globe Surfer otobüslerde kullanılan bir tür 3g modem cihazıymış bu gece İstanbul’dan Denizli’ye giderken bunu öğrendim. Cihaz son derece basit çalışıyor. Simkartınızı takıp basit bir kurulum yapıyorsunuz. Evinizdeki normal modemler gibi bağlantı hızı 7.2 ancak oldukça performaslı bir bağlantısı var bunu açık söyleyeyim. Ancak tahminimce bu hatlar 3g olmayınca normal bağlanıyorlar. Bu yüzden faturalar biraz kabarık olabilir.Daha detaylı bilgileri ise kendi sitelerinden aynen alıntı yapacağım resimli kurulum anlatımıyla beraber ingilizce bir metin ancak resimlere bakarak bile kurulum yapabilirsiniz.

Configuring the GlobeSurfer III for Internet Access

Insert your 3G-enabled SIM card correctly into the side of the unit.
Connect the Ethernet port to a PC or laptop using the crossover cable provided.
Power on the unit.
Wait for a few seconds while the unit boots and registers on the cellular network.
On the PC, launch an Internet browser and browse to the default IP address for the unit (http://192.168.1.1)
If this is the first time you are connecting to the unit, the following window will be displayed:

Configuring the GlobeSurfer III for Internet Access

Select your desired language and click Next. The following window will be displayed:

Configuring the GlobeSurfer III for Internet Access

Enter a password for the default administrator account and click Next. The following window will be displayed:

Configuring the GlobeSurfer III for Internet Access

Set the correct Time Zone on the device and click Next. The following window will be displayed:

Configuring the GlobeSurfer III for Internet Access

Select the CLID presentation method you wish to use – this should be left at the default value unless specifically required by your telephony maintainer. Click Next, the following window will be displayed:

Configuring the GlobeSurfer III for Internet Access

Enter the appropriate Access Point Name (APN) for your cellular network provider:

Vodafone		internet
Orange		orangeinternet
O2		mobile.o2.co.uk
T-Mobile		general.t-mobile.uk
Three		three.co.uk

Click Next, the following window will be displayed:

Configuring the GlobeSurfer III for Internet Access

Specify whether you wish the WiFi element to be enabled and define the wireless network name you wish to be broadcast (SSID). Click Next, the following window will be displayed:

Configuring the GlobeSurfer III for Internet Access

Select the type of security you wish to enforce on the wireless network and if desired create an access control list of permitted MAC addresses. Click Next, the following window will be displayed:

Configuring the GlobeSurfer III for Internet Access

Select the level of protection you wish the built-in firewall software to provide. Click Next, a summary of your installation selections will be displayed. Review the settings and click Finish to complete the setup wizard. You will then be displayed the main home interface of the unit:

Configuring the GlobeSurfer III for Internet Access

To initiate a connection to the Internet, click the Connect button.

If your cellular provider requires a username and password to connect to the 3G / GPRS service, this will need to be entered.

NOTE – although most providers include a username and password along with the connection settings, in a lot of cases this is not required so it is recommended that you try connecting without them initially.

To enter a username and password, click on the link to ‘Go to Advanced Mode’ at the top of the screen.

Click on the icon for ‘Internet Connection’ at the top of the screen.

Edit the Settings of the ‘WAN Cellular Connection’, the following window will be displayed:

Configuring the GlobeSurfer III for Internet Access

Here you can edit the APN, Username and Password information.

Your GlobeSurfer III has been successfully configured for Internet access.

kaynak:http://blog.brightpointuk.co.uk/configuring-globesurfer-iii-internet-access

Bir Cevap Yazın

E-posta hesabınız yayınlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir

Şu HTML etiketlerini ve özelliklerini kullanabilirsiniz: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>